D-Square Foundation Repair
uses the Pressed Piling System. This system continues to be the standard of the industry, especially in Texas. Unlike the drilled pier work done by most companies, the Pressed Piling system is sturdy, efficient and takes just a couple of days compared to up to two weeks for other types of repair.

We take extra measures to preserve the property to its original appearance. Plants that were removed are returned to the landscape, exterior cracks are re-grouted, and sidewalks, driveways and patios are cleaned to every customer’s satisfaction.
The first question you may have about the D-Square Driven Pilings System is, “Why use something different?” The answer is simple: D-Square Driven Pilings Work!
Why Does It Work?
Many people you know have probably had expensive and unhappy experiences with conventional foundation repairs. In response to these problems, research began to develop a repair system that would: 1) Minimize dependence on an exact knowledge of the soil. 2) Balance the exact load to be applied to the pile. 3) Allow more tolerance in installation procedures.
How Does It Work?
The D-Square Driven Pilings System answers the problems inherent in the repair of the light loaded, shallow foundations installed under most types of construction.

a. The load is automatically compensated and is used positively to properly drive the length of pile necessary of its support.
b. The pile tests the soils as it is driven. Skin friction necessary to support the applied load determines the length of piling and will vary according to the character of the soil.
c. Alignment of the pile starts at the surface and continues throughout its driven length.
d. Initial settlement due to debris left in the bottom of a drilled hole is non-existent.
e. The strength of the concrete used to form the pile is sections are verified during installation.
f. Since the pile sections are pre-cast, on-site concrete pours are not required, minimizing problems of site cleanliness and destruction of valuable vegetation.
g. Pre-casting and curing eliminates lost time on the job and results in better control of concrete strength.
Other Pluses of the D-Square Driven Piling System Include:
- No heavy equipment in the yard to damage lawns and shrubs.
- Minimal damage to existing landscaping.
- No mixing or pouring of concrete.
- No waiting for concrete to cure.
- It is quick, clean, efficient and best of all permanent!